Soudal PTFE (Teflon) Aerosol Spray

High-grade lubricant based on PTFE (Teflon) for treatment of metal and plastic parts. To be used for machines, roller bearings, axles, cogwheels, conveyer belts, rubber gasket profiles etc.

To be used on parts that are exposed to long or high force and (-50°C to 250°C). High capacity ofpenetration. Repels water and dirt. PTFE offers long-term protection against friction and prevents wear. Very good mechanical and thermal stability.

Features

• Lubricates
• Reduces friction and wear
• Rust and corrosion-resistant
• Water-repellent
• Silicone free
• For inside and outside use
• Aerosol can be used in any angle (360°)

Technical Information

• Packaging: 400 ml aerosol
• Basis: mixture of mineral oils with PTFE.
• Consistency: liquid
• Density: Ca. 0.82 g/ml
• Welding Load 4 Ball EP test (ASTM D2596): 2000 kg
• Viscosity: 210 cSt at 20°C
• Flashpoint: 270°C
• Water-washable at 80°C: 2.09%
• Temperature resistance: from -40°C to +250°C
• Application temperature: from +5°C to +30°C
• Solubility in water: not soluble
• Volatile Organic Compounds (VOC): 80%
• Color: white-yellow
• Shipping weight: 0.370 kg

Application method

Surfaces must be cleaned, degreased and dry. Shake can well before use. Spray at a distance of appr. 20 cm of the object. To obtain the best result apply the spray while the moving parts are in motion if possible.
Use only in well-ventilated areas. In case of contact with eyes, wash immediately with plenty of water.