Soudal Genius Gun Polyurethane Handwork Foam - 300 ml

Genius Gun Fill & Insulate PU Foam is a ready to use single component self expanding polyurethane foam. Due to the the patented Genius Gun system the application of PU Foam becomes very easy and precise.

The extrusion straw can be resealed which makes it possible to continue the application from a partially used canister for several weeks.

Application Areas

• Installation of door frames and window frames.
• Filling of cavities.
• Sealing and filling of openings and cavities in roof constructions.
• Creation of an acoustic screen.
• Creation of a sound deadening layer.
• Improvement of insulation in cold store facilities.
• All other usual PU Foam applications.

Features

• Excellent form stability – no shrink, no post expansion.
• Excellent filling characteristics.
• Excellent adhesion to all building materials (except PE, PP and PTFE).
• High insulation values, both thermal and acoustical.
• Excellent installation performance.

Application Instructions

We recommend preliminary compatibility tests on surfaces on which PU Foams have not been applied previously. Always moisten surfaces in order to improve curing and cellular structure. Wear gloves and safety goggles.

1. Shake the canister thoroughly for around 30 seconds. Open the lid on the top and wear the enclosed gloves. Straighten the applicator tube. Apply a fine water spray to the surface which needs to be clean and free of grease and dust.
2. Turn around the canister and extrude the foam carefully by applying pressure on the trigger. Fill cavities on for 30 to 40 % as the foam will continue to expand during the curing process. Shake canister regularly during the application. If Foam is applied in several layers, moisten between each layer of foam.
3. At the end of the application, close the applicator tube with the sealing plug and click into the holder. Close the lid. The canister can be reactivated for up to 6 weeks if resealed correctly.
4. Uncured foam can be removed with Foam Cleaner or acetone. Cured foam can only be removed mechanically.

Cured PU foam must be protected from UV-radiation by painting or applying a top layer of sealants (silicone, MS Polymer, etc). For the filling of large volumes apply product in layers and moisten between each layer.

The price includes: one aerosol package of 300 ml